The Chrysler 300 stands out as one of the most elegant and highly prized full-sized sedans in the world. A car of this status demands that owners use the highest quality auto parts in its engine. You can take the best care of your own 300 by learning how and when to change its Mopar air filter.
What is a Mopar Air Filter? A Mopar air filter is specifically designed for use in Fiat Chrysler vehicles. Filters made by the Mopar organization are commonly found in race and high-end show cars although they are also used in vehicles like the Chrysler 300.
Despite being made for luxury class automobiles, the filters are relatively inexpensive and can be purchased for less than $50. They are made out of materials like foam, paper, or cotton and designed to keep contaminants like dirt, dust, pollen, leaves, and other debris out of the engine.
Like most car air filters, the Mopar air filter has a lifespan of about one year or 12,000 miles. Once it has reached this length of time or driving miles in your engine, it should be replaced as soon as possible.
Installing an air filter in your Chrysler 300 is a relatively simple task if you are familiar with the layout of your car's engine. If not, you are encouraged to take your car to a licensed Chrysler mechanic to buy and have your filter replaced.
What Causes a Mopar Air Filter to Wear Out? As with any car air filter, one made by the Mopar organization is not designed to last forever. In fact, it has a fairly short lifespan of a year or less or 12,000 driving miles. As such, yours might need to be replaced because of simple wear and tear.
However, other circumstances can cause the filter to wear out before it has reached the one-year or 12,000-mile limit. For example, its primary job is to keep out contaminants from the engine. If it becomes clogged with debris like dust and dirt, it can stop working and need to be replaced.
Similarly, your air filter may need to be replaced more often if you live in an area that has poor air quality or pollution. As you drive your vehicle, you put more stress on the filter and its effort to remove the pollution before it reaches your engine. You may find that you have to buy a new one well before you have used your current one for 12 months.
Finally, it can wear out and need replacing if it is not installed correctly in the first place. Installing an air filter is relatively straightforward and self-explanatory.
However, if you are not familiar with how to take care of this task or you allow a novice mechanic to work on your car, you leave open the possibility of the filter not being put in correctly. When you want this part to last for as long as possible, you should insist on having a Chrysler mechanic put the filter in for you.
Mopar Air Filter Replacement Signs Your Chrysler 300 may give you several signs that it is time to replace the Mopar air filter in the engine. The first and most obvious way that you can tell if you need a new one is if your current filter looks dirty. A dirty and black air filter is well beyond its point of usefulness and should be replaced with a new and cleaner one.
Second, if you smell gasoline when you start your car, you should inspect the air filter and replace it if necessary. The smell of gas could mean that the filter is clogged and no longer able to function as expected. Putting in a new filter should eliminate the gas smell when you start your 300's engine.
Third, you should inspect this engine part if the check engine light comes on or you hear popping or coughing when you drive your vehicle. The sounds and dashboard light could signal that your engine is misfiring, which can be taken care of by installing a new filter.
Finally, if you notice that your exhaust is black and sooty, you should replace the filter. Black, sooty exhaust signals that the filter is clogged and can no longer get rid of contaminants in your engine.
These signs tell you when to have the filter replaced. You might be able to help the new one last longer by taking some simple preventative measures when you drive your Chrysler 300.
Protecting Your 300's Mopar Air Filter What steps can you take to make your new air filter last longer in your 300's engine? Fortunately, you have several options that all should help you take the best care of this important auto part.
The first measure available to you involves keeping an eye on the car's mileage. The filter can last for up to a year or be driven for about 12,000 miles.
Once you reach that mile limit, you should consider having a new one put in your engine. Likewise, if you are past a year from the time that the filter has been replaced, it may be time for a new one to be installed.
Second, you should open the hood every so often and actually take a look at the filter. By taking it out and looking at it, you can tell if it is still clean or if it has become clogged. If it is so dirty that you cannot remove the debris by shaking or knocking it against a wall or the ground, you should have it replaced promptly.
Last, you should pay attention to the color of the exhaust coming from your engine. If you notice it is black or appears to be full of soot, you should consider having the filter replaced soon.
These simple preventative measures can go a long way in keeping your filter in good condition. You can protect the longevity and usefulness of the engine in your Chrysler 300.